|
 |
Flow Transmitter |
 |
| |
Transmitter
Model No: A510 |
| |
|
 |
Description :
The VATS A510 is a field mounted flow meter using JT-121 the insertion type Flow Sensor. It gives a digital readout of the flow rate (M3/Hr, LPH or LPM). It displays Total in M3 & Liters. The relays can be set to control volume or flow rate. In communication port current output is standard 4 - 20mA, With additional card, RS 232 or Rs485 output options are also available This is the most user friendly meter, anybody can easily calibrate & install it. The A51 0 uses advanced micro controller for precision.
|
| |
Wiring Details:
Wiring connections:
• Red wire: Supply 5-12 VDC
• Blackwire: Output signal TTL
• Shield wire: Common
|
 |
|
|
Technical data :
Function |
Rate indicator + totalizer + Relay output + Communication |
Supply Voltage |
230 VAC ± 10% & 12 V DC (for Loop Power) |
Meter Size |
80mm diameter
150mm deep |
Display |
2 line 8 digit alpha-numeric LCD |
Signal Input |
TTL from JT 121 |
Calibration |
Using front panel membrane keys |
Output |
• One Relay (standard), 2nd Relay opt. 3A @ 230 V AC |
• 4 - 20 mA current o/p (loop powered) accuracy ± 0.1 % |
• RS232 I RS 485 (with additional card) |
• Printer port (with additional card) |
|
| |
|
| |
Note: Sensor is reverse polarity protected. |
| |
|
|
| |
|
|
| |
| |
|
| |
Tramsmitter
Model No: J510 |
| |
|
|
Description :
The VATS J510 is a field mounted flow meter using JT-121 the insertion type Flow Sensor. It gives a digital readout of the flow rate (M3/Hr, LPH or LPM). It displays Total in M3 & Liters. The relays can be set to control volume or flow rate. In communication port current output is standard 4 - 20mA, With additional card, RS 232 or Rs485 output options are also available This is the most user friendly meter, anybody can easily calibrate & install it. The A51 0 uses advanced micro controller for precision.
|
| |
Wiring Details:
Wiring connections:
• Red wire: Supply 5-12 VDC
• Blackwire: Output signal TTL
• Shield wire: Common
|
|
|
|
Technical data :
Function |
Rate indicator + totalizer + Relay output + Communication |
Supply Voltage |
230 VAC ± 10% & 12 V DC (for Loop Power) |
Meter Size |
80mm diameter
150mm deep |
Display |
2 line 8 digit alpha-numeric LCD |
Signal Input |
TTL from JT 121 |
Calibration |
Using front panel membrane keys |
Output |
• One Relay (standard), 2nd Relay opt. 3A @ 230 V AC |
• 4 - 20 mA current o/p (loop powered) accuracy ± 0.1 % |
• RS232 I RS 485 (with additional card) |
• Printer port (with additional card) |
|
|
| |
|
| |
|
| |
| |
|
|
|
