The VATS A210 is a field mounted flow meter using JT-121 the insertion type Flow Sensor. It gives a digital readout of the flow rate (M3/Hr, LPH or LPM). It displays Total in M3 & Liters. The relays can be set to control volume or flowrate.
This is the most user friendly meters, anybody can easily calibrate & install them online. This meter uses advanced micro controller for precision.
Wiring Details: Wiring connections:
• Red wire: Supply 5-12 VDC
• Blackwire: Output Signal TTL
• Shield wire: Common
Technical Data :
Function
Rate indicator
Supply Voltage
230 VAC ± 10%
Meter Size
80mm dia X 100mm deep
Display
2 line 8 digit alpha-numeric LCD
Signal Input
TTL from JT 121
Calibration
Using front panel membrane keys
Flow Sensors JT 121 & Fitting
Flow rate range
0.5 to 5 m/sec
Accuracy
± 1 % of full scale
Input Voltage
5-12 VDC
Output Signal
Square wave of 5 to 12 Volt 15-17.5 Hz/m/sec
Cable length
3 meters
Protection rating
IP67
Rate Indicator + Totalizer Model No:J210
Description:
The VATS J210 is a panel mounted flow meter using JT-121 the insertion
type Flow Sensor. It gives a digital readout of the flow rate (M3/Hr, LPH or
LPM). It displays Total in M3 & Liters. The relays can be set to control volume
or flowrate.
This is the most user friendly meters, anybody can easily calibrate & install
them online. This meter uses advanced micro controller for precision.
Wiring Details:
Wiring connections:
Red wire: Supply 5-12 VDC
Black wire: Output signal TTL
Shield wire: Common
Note: Sensor is reverse polarity protected
