|
 |
FT - 10 ( Turbine flow sensor + temp sensor combo) |
 |
| |
|
Floredo FT-10 is another convenient combo unit,
to bridge the gaps between industry expectations
& available solutions. Due to the Global aware-
ness of energy consumption, it's very important to
, keep a tab on our energy spendings. This unique
product finds many applications where there is a
requirement to know the Flow rate & Total as well
as the temperature. |
| |
Truly futuristic, this unique combination of sensors finds numerous applications in industry as well as
home use. The FT-10 is synergistic to our motto -
Where there is a flow it should be monitored. This
product again proves our commitment to help
maintain a GREEN environment. |
|
|
|
The FT-10 is enclosed in a body made of engineering plastic. The flow is measured
with our proprietary turbine sensor & the temperature sensor is the industry standard
PT-100. This combination is the right solution where the requirement is to measure
the flow rate & Total as well as temperature of the media. |
| |
| Technical Specifications : |
| |
Flow |
2 to 40 I/min |
Measuring range |
±1.5 % FS |
Accuracy, 0 to 100 oC |
< 1 s |
Response time (63.2 %) |
0.21/min |
Resolution |
|
Temperature |
|
Measuring range 0 to 100 oC |
±1 oC |
Accuracy, 25 to 80oC |
±2 oC |
Accuracy, 0 to 100oC |
<1s |
Response time |
0.5 oC |
Resolution |
|
Media and environment |
|
Media types |
The sensor is compatible with liquids
(kinematic viscosity < 2 mm2/s) |
Media temperature (operation) |
Oto100oC |
Ambient air temp. |
(operation) -25 to 60 DC |
System burst pressure |
> 16 bar |
Electrical data |
|
Power supply |
5 V DC (± 5 %) |
Output signals |
Ratiometric |
Flow signal |
0.5 - 3.5 V (Zero at 0.35 V) |
Temperature signal |
0.5 - 3.5 V |
Power consumption |
<50 mW |
Load impedance |
> 10 KΩ |
Sensor materials |
|
Sensing element |
Silicon-based MEMS sensor |
Seal (sensor to housing) |
EPDM rubber |
Dimensions |
|
Sensing element |
47 x40 x20 mm |
|
| |
Applications |
• thermal management in solar heating systems
• industrial process flow control
• flow rate detection for pump controls
• monitoring of pumps, valves and filters
• cooling and temperature control
• domestic hot-water systems
• heat metering (solar - heat pumps). |
| |
Features |
• flow ranges: 1-12, 1-20,2-40,5-100, 10-200 and 20-400 I/min.
• voltage output (ratiometric, ideal for use with microprocessor and PLC)
• compact and robust design
• approved for potable water:WRAS, KTW, W270,ACS. |
| |
Benefits |
• flow and temperature sensor in one package (two in one sensor)
• fast temperature response (direct media contact)
• compatible with wet, aggressive media
• cost-effective and robust construction. |
| |
|
|
|
|
|
|
