• NDA Road, Warje Bypass, Shivane
  • email-t

Plastic Paddlewheel Flow Sensors / Transmitters - OEM Special

We are Manufacturer, Supplier, Exporter of Plastic Paddlewheel Flow Sensors / Transmitters and Our setup is situated in Pune, Maharashtra, India. City wise / country wise Channel Partnership enquiries also solicited all over the world. Few of our concepts have already awarded patents in India and many new designs are applied for the patent, recently.


oem-special-jt-121-pp-sensor

GENERAL DESCRIPTION

JT-121 is paddle Wheel type Polymer body Flow sensor suitable for clear liquid application. Being light weight and compact, Installation is easiest, still robust. Vats JT-121 is most simple and most economical flow sensing device for clear liquids.Proven and long lasting bearing materials has made this sensor a common choice of all OEMs. JT-121 sensor can be installed in wide range of pipe sizes. Variety of materials is available in installation fittings like ABS, PVC, and SS. These fittings include Tees, Saddles, with specific Weld Ends, Thread Ends, Flange Ends and Weldon Adaptor.

• Use of filter before Flowmeter is necessary
• Straight Run conditions given in manual must be maintain while installation

Ask For Quote


pdf-download

FEATURES

  • Four bladed paddle for optimal performance.
  • Open cell design for linear and repeatable output.
  • Dynamic range with virtually no pressure drop.
  • Corrosive resistant plastic for aggressive fluids.
  • Wide choice of installation Fittings.
  • Lower installation and maintenance cost.

TECHNICALS

Technical Data

  • Velocity: 1 To 5 m/s
  • Linearity: +/- 1 % OF Full scale
  • Repeatability: +/- 0.5 % OF Full scale
  • Temperature range: 0 to 50°C
  • Pressure range: upto 5 bar
  • Viscosity Range: upto 20 cpc

Electrical Connection Ratings

  • Power supply: 12-24 V DC +/-10%
  • Current rating: <10 mA
  • Output Voltage: 12-24 mA
  • Output Signal: NPN/PNP
  • Protection: Short Circuit and Reverse polarity
  • Cable Type: 3 Core PTFE With PVC Coating
  • Max. Cable Length: 100 Meters

Material

  • Sensor Body: PP
  • Paddle: Delryn
  • PIN: T.C
  • O Ring: Silicone / Viton
  • Protection Rating: IP-68

Please inform Maximum and Minimum Flow Rate, as it is one time Programmable at the time of manufacturing


APPLICATIONS

  • Water Treatment
  • Agriculture
  • Concret Mixing Plants Mobile / Fixed
  • Paper and Pulp
  • Food and Beverages
  • Waste Water
  • Power
  • Textiles Dying Process

LINE SIZE SELECTION CHART

Pipe size (NB) 15 25 40 50 65 80
Min flow M³/Hr 0.2 0.8 1.9 3.5 5.8 7.5
Maxflow M³/Hr 2.1 8.0 19 35 58 75
Pipe size (NB) 100 125 150 200 250 300
Min flow M³/Hr 14 22 31 56 87 126
Maxflow M³/Hr 140 220 310 560 870 1260

Overall accuracy of +/-2 % the reading for 10-100 % of Flow Range & +/ 5% for 0-10 % of flow Range.


ELECTRICAL WIRING

Variety of Electronic Readers cum controllers are available.

oem-special-jt-121-pp-sensor-digram

MECHANICAL

Straight inlet and outlet distances that must be maintained when installing fittings inpipe lines in order to achieve Laminar flow conditions. The most important layouts that could lead to turbulence in the flow areshown below, together with mentioned minimum and inlet and outlet distances. These insure turbulent, problem-Free measurement conditions at the measurement point. For more Installation guidelines please refer manual. for best results Reynolds number (R) is greater than 5000 especially for viscous liquids.to Calculate R use following formula

oem-special-jt-121-pp-sensor-digram
oem-special-jt-121-pp-sensor-digram

NOTE :
1. In Vertical Piping only Upstream flow is recommended.
2. Flow Meter should be installed before valve.
3. Y type strainer is must for recommend result.

arrow